12
security or reliability, it may be desirable to disable the processing of that message, thus preventing other
BACnet devices from modifying the B3075’s Broadcast Distribution Table using this message, although
disabling such processing is not in conformance with the BACnet Standard. To disable processing of the
BACnet/IP Write-Broadcast-Distribution-Table message, select “Reject Write-BDT requests”; processing is
enabled by default.
Parameters for BACnet NAT traversal
A B3075 with the BBMD function enabled on the Customer port can be configured to communicate
through a network address translation (NAT) router, but this requires careful network design and
configuration of the B3075. Please refer to clause J.7.5, “BBMD Operation with Network Address
Translation,” in the BACnet Standard for details.
To Next Page
Loading...
