CipherLab 8230 Reference Manual

100
8600 Series Mobile Computer Reference Manual
KEYPAD SEEMS NOT WORKING
 Perform the keyboard test. (See 3.3.4 Keyboard.)
 If the problem persists, reload the battery pack and perform the test again.
VIBRATOR SEEMS NOT WORKING
 Perform the vibrator test. (See 3.3.7 Vibrator.)
 If the problem persists, reload the battery pack and perform the test again.
MOBILE COMPUTER SEEMS NOT WORKING
 Upload all data to the host and perform the memory test. (See 3.3.5 Memory.)
 If the problem persists, reload the battery pack and perform the test again.
CANNOT SCAN BARCODES
LOW BATTERY CONDITION
 Check if the battery icon on the screen indicates a low battery status. If so, replace it
with a fresh battery then.
 If the problem persists, check if the battery contacts get dirty or the battery pack
does not fit to the compartment.
BARCODE READER PROBLEM
 Perform the reader test to see if the reader is working. (See 3.3.1 Reader.)
 If the problem persists, reload the battery pack and perform the test again.
CANNOT DECODE DATA AFTER SCANNING
UNREADABLE BARCODE
 Check if the barcode is defaced. A defaced barcode may not be readable.
UN-PROGRAMMED TO READ
 Check if the scanner is programmed to read the symbologies (types of barcode) that
you are trying to read.
 Try scanning a test barcode of the symbology you are trying to read.
DIRTY SCAN WINDOW
 Check if the scan window gets dirty. Wipe it with a clean and dry cloth, and try again.

CipherLab 8230 Specifications

General

Brand	CipherLab
Model	8230
Category	Handhelds
Language	English