CipherLab 8230 Reference Manual

20
8600 Series Mobile Computer Reference Manual
1.6 DATA CAPTURE
1.6.1 BARCODE SCANNER
A wide variety of scan engines is available for delivering flexibility to meet different
requirements. Depending on the scan engine integrated, the mobile computer is capable
of scanning barcodes of a number of symbologies that are enabled by default while
running the preloaded AG runtime. Refer to
3.3.1 Reader for functional test.
If you need to scan barcodes that are encoded in a specific symbology disabled by
default in AG runtime, FORGE Application Generator (ForgeAG.exe, the application on
the included CD-ROM) allows configuring symbology settings, as well as reader settings.
After launching the application, enable the desired symbologies, and then download the
application settings to the mobile computer.
Note: For details on configuring reader and symbology settings, please refer to the
documentation of the software you use.
Varying by the scan engine installed, the supported symbologies are listed below.
 1D CCD scan engine
 1D Laser scan engine
 2D scan engine
Note: In AG or CipherNet runtime, not all of the symbologies are enabled by default.
Instead of running any of them, you can develop your own applications to control
the scan engine for data collection.
Symbologies Supported (Default Setting: Enable/Disable) CCD/Laser 2D
Codabar Enabled Enabled
Code 11 Disabled
Code 93 Enabled Enabled
CC-A/B Disabled
CC-C Disabled
Composite
Code
TCIF Linked Code 39 Enabled
MSI Disabled Disabled
Plessey Disabled
Postal Codes Enabled
Telepen Disabled
Code 128 Enabled Enabled
GS1-128 (EAN-128) Enabled Enabled
Code 128
ISBT 128 Enabled
Code 2 of 5 Industrial 25 (Discrete 25) Enabled Enabled

CipherLab 8230 Specifications

General

Brand	CipherLab
Model	8230
Category	Handhelds
Language	English