72
8600 Series Mobile Computer Reference Manual
Power Saving
This refers to the low power consumption mode.
Options — Enable or Disable
The value you set must match that set for the access point.
Ad-Hoc
This refers to peer-to-peer mode, without going through access points.
Options — Enable or Disable
Fixed BSSID
This refers to the use of a specific AP’s MAC address as the fixed Basic Service Set Identifier.
The mobile computer can ONLY communicate with this one and only access point.
Scan Time
Specify the time period the mobile computer searches for wireless devices on the network.
Normal: By default the scanning time is set to normal.
Double: specify double the scanning period.
To Next Page
Loading...
Need help?
General
