CipherLab 8230 Reference Manual

78
8600 Series Mobile Computer Reference Manual
Note: If you are programming in C or BASIC, be aware that the antenna icon will appear
on the device screen after NetInit() or START TCPIP() is called. (WPA must be
enabled first!)
The flashing icon indicates 8600 is
processing a pre-share key.
W
ait for a few seconds.
The antenna icon, with gray bars, flashes
to indicate 8600 is connecting to an access
point under the same SSID.
Once connected, the antenna icon will stop
flashing. Next to the icon, the more white
bars, the stronger the signal.

CipherLab 8230 Specifications

General

Brand	CipherLab
Model	8230
Category	Handhelds
Language	English