The CircuPool SJ-Series system comes with three main components:
Control Module:
This component supplies power to the Cell and allows you to customize the system's operation in order to
meet your pool's unique needs.
Electrolytic Cell:
This component creates chlorine as the water inside passes through and returns to the pool. The Electrolytic
Cell ("Cell") contains a bipolar set of titanium plates that use a low level of DC electrical power to generate
chlorine from salt in the water.
Flow Switch & Temperature Sensor:
This component ensures that there is adequate water flow for the Cell to activate. It also contains additional
sensors that ensure optimal operation of the Cell.
Cleaning Tool:
This component is unique to the CircuPool SJ Series and allows for simple acid-free maintenance of the Cell.
Additional Items Required For Installation (Not Included)
PVC Cement, PVC Primer, Hacksaw or Pipe Cutters, Screwdrivers, Permanent Marker, 2x 90° Elbows
To Next Page
Loading...
