Figure 297: Conguration screen of transistor digital outputs (alarm mode).
The parameter selected is indicated in white.
The following options appear in the lower area:
>
<
>
>
>
>
>
<
<
<
<
<
1
>
<
>
<
Conguration
values
Previous
Next
Conrm
and save
Delete
parameter
Back
Main
menu
Delete
character
Figure 298: Setup menu: transistor digital outputs (alarm mode)�
Use the keys and to select the different options.
To conrm the selection, press the key .
● For programming the variable code which controls the transistor digital output you need the
Table 32 and Table 33:
To cancel the operation of a digital output, the 00 code must be programmed.
● When programming the pre-alarm value:
If the device exceeds the programmed pre-alarm value, the icon is activated on the
display, and the icon that indicates the alarm status changes colour ,
207
Instruction Manual
CVM-A1000 - CVM-A1500
To Next Page
Loading...
