7.4.- ANALOGUE INPUTS/OUTPUTS
This expansion module contains 8 analogue outputs and 4 analogue inputs.
7�4�1�- CONNECTION TERMINALS
A�- Terminals on the upper face
Table 129: List of terminals on the upper face, Analogue inputs/outputs module�
Device terminals
1: O
1
, Analogue output 1 6: O
6
, Analogue output 6
2: O
2
, Analogue output 2 7: O
7
, Analogue output 7
3: O
3
, Analogue output 3 8: O
8
, Analogue output 8
4: O
4
, Analogue output 4
9: COM, Common analogue outputs
5: O
5
, Analogue output 5
1
2
3
4 5 6 7 8 9
Figure 350:Analogue Input/Output Terminals, upper face�
The analogue outputs are active; they do not need an external power supply for
generating 20 mA or 10 V.
The operating mode of each output (Voltage or Current) is congured on the de-
vice's screen or by communications.
Make sure the output is congured according to your needs before connecting a
device to it. Your device could be damaged.
293
Instruction Manual
CVM-A1000 - CVM-A1500
To Next Page
Loading...
