Cisco IP Phones, connecting to 10, 40
Cisco RPS
See RPS
CiscoView 27
Class 1 laser warning 3, 41, 44
CLI 27
accessing by using Express Setup 2
accessing through console port 2
code compliance warning 5
command-line interface
See CLI
connecting
to 10/100 ports 39
to 10/100/1000 ports 39
to console port 4
to DC power 1–8
to SFP modules 41–43
to XENPAK modules 44–45
connecting to the console port 5
connection procedures 39–45
connectors and cables
console port 4–10
power (AC and RPS) 25
SC connectors 3
SFP module ports 3
XENPAK module ports 4
console port
connecting to 5
connectors and cables 4–10
described 26
conventions, document vii
crossover cable
connecting to 1000BASE-T SFP module ports 43
pinout
four twisted-pair 10/100 ports 7
four twisted-pair, 1000BASE-T ports 9
D
DC circuit warning 4
DC input voltages for RPS 2300 and RPS 675 2–9
DC power
connecting to 1–8
RPS 3
specifications 2
To Next Page
Loading...
