Cisco 3G MicroCell User Manual

6
Congratulations on the purchase of the AT&T 3G MicroCell™. The 3G MicroCell provides voice and data service to AT&T
3G wireless phones and devices within a home or small business environment. The 3G MicroCell is secure and can deliver
maximum cellular signal strength within its coverage area – it’s like having your own mini cell tower in your home or office.
Before You Begin
To operate the 3G MicroCell, you must have the following items:
• High Speed Internet service over DSL or Cable
*
• Modem or gateway (a Wi-Fi router is optional)
• Computer with Internet access to register your device
• System Administrators (business customers) see Firewall Specifications on page 5 of this User Manual.
• Please verify these requirements before going any further
Allow up to 2 hours to have your 3G MicroCell up and running. Your part (online activation and equipment setup) takes
10-15 minutes. The additional time is for system configuration and 3G service activation. These tasks are handled by the
3G MicroCell and require no effort on your part.
In order to activate your 3G MicroCell you will be required to enter your AT&T Online Wireless Account user name and password.
If you have not previously registered for a user name and password, you will be required to do so during the 3G MicroCell setup.
What’s in the Box?
• Remove the contents of the AT&T 3G MicroCell
TM
package.
• Verify that you received the following:
*
Downstream speeds of at least 1.5 Mbps and upstream speeds of at least 256 Kbps are recommended for best performance.
There are no restrictions on broadband service providers.
Welcome
AC Power
Adapter
Yellow
Ethernet Cable
AT&T 3G MicroCell™
Getting Started Guide
and User Manual
If anything is missing or appears to be damaged,
contact AT&T Customer Support at
1.888.334.3787
and
enter PIN 88346
for assistance.
Let’s get started.
Start Here!
AT&T 3G MicroCell
TM
Getting Started Guide
C
ongratulations on the purchase of your new AT&T 3G MicroCell
TM
. The 3G MicroCell provides voice and data service to AT&T 3G
wireless phones and devices within your home or small business environment. The 3G MicroCell is secure and can deliver maximum cel-
lular signal strength within its coverage area – it’s like having your own mini cell tower in your home or office.
• Allow
up to two hours
to have your 3G MicroCell up and running. Your part (online activation and equipment setup)
takes 10-15 minutes. The additional time is required for system synchronization between the 3G MicroCell and the
AT&T network.
• In order to activate your 3G MicroCell you will be required to enter your
AT&T myWireless Account user name
and password
(the same account you use to pay your wireless bill online). If you have not previously registered
for a user name and password, you will be required to do so during the 3G MicroCell setup.
What’s in the Box?
•
Remove the contents
of the AT&T 3G MicroCell
TM
package.
•
Verify
that you received the following:
AT&T 3G MicroCell™
AC Power
Adapter
Yellow
Ethernet Cable
Getting Started Guide
and User Manual
User
Manual
AT&T
3G MicroCell™
User
Manual
AT&T
3G MicroCell™
AT&T recommends that you use the AT&T 3G MicroCell™ Getting Started Guide for initial setup of your
3G MicroCell. Refer to this User Manual for troubleshooting steps or if you want to configure ‘Priority
Mode’ on your system (see Option C on page 11).

Cisco 3G MicroCell Specifications

General

Brand	Cisco
Model	3G MicroCell
Category	Extender
Language	English