EasyManua.ls Logo

Cisco 4500M

Cisco 4500M
608 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40-10
Software Configuration Guide—Release 12.2(25)EW
OL-6696-01
Chapter 40 Configuring NetFlow Statistics Collection
Configuring NetFlow Statistics Collection
Note The default value of the minimum mask is zero. The configurable range for the minimum mask is from
1 to 32. You should chose an appropriate value depending on the traffic. A higher value for the minimum
mask will provide more detailed network addresses, but it may also result in increased number of flows
in the aggregation cache.
To configure a minimum prefix mask for the Router-Based Aggregation feature, perform the tasks
described in the following sections. Each task is optional.
Configuring the Minimum Mask of a Prefix Aggregation Scheme
Configuring the Minimum Mask of a Destination-Prefix Aggregation Scheme
Configuring the Minimum Mask of a Source-Prefix Aggregation Scheme
Monitoring and Maintaining Minimum Masks for Aggregation Schemes
Configuring the Minimum Mask of a Prefix Aggregation Scheme
To configure the minimum mask of a prefix aggregation scheme, perform this task:
Configuring the Minimum Mask of a Destination-Prefix Aggregation Scheme
To configure the minimum mask of a destination-prefix aggregation scheme, perform this task:
Configuring the Minimum Mask of a Source-Prefix Aggregation Scheme
To configure the minimum mask of a source-prefix aggregation scheme, perform this task:
Command Purpose
Step 1
Router(config)# ip flow-aggregation cache prefix
Configures the prefix aggregation cache.
Step 2
Router(config-flow-cache)# mask source minimum
value
Specifies the minimum value for the source
mask.
Step 3
Router(config-flow-cache)# mask destination minimum
value
Specifies minimum value for the
destination mask.
Command Purpose
Step 1
Router(config)# ip flow-aggregation cache destination-prefix
Configures the destination aggregation
cache.
Step 2
Router(config-flow-cache)# mask destination minimum
value
Specifies the minimum value for the
destination mask.
Command Purpose
Step 1
Router(config)# ip flow-aggregation cache source-prefix
Configures the source-prefix aggregation
cache.
Step 2
Router(config-flow-cache)# mask source minimum
value
Specifies the minimum value for the source
mask.

Table of Contents

Other manuals for Cisco 4500M

Related product manuals