1-6
Cisco 7206 Installation and Configuration Guide
OL-5102-02
Chapter 1 Product Overview
Software Requirements
Note For a chassis footprint, additional dimensions, and clearance requirements for the Cisco 7206 perimeter,
refer to Chapter 2, “Preparing for Installation,” the “Site Requirements” section on page 2-2.
Software Requirements
Cisco IOS requirements for the Cisco 7206 are listed below:
• Cisco IOS Release 11.1(17)CA or a later release of Cisco IOS 11.1 CA
• Cisco IOS Release 11.2(12)P or a later release of Cisco IOS 11.2 P
• Cisco IOS Release 11.3(2)T or a later release of Cisco IOS 11.3 T
• Cisco IOS Release 12.0(3)T or a later release of Cisco IOS 12.0 T
Note For software information for the Cisco AS5800 Universal Access Server, refer to the Cisco AS5800
Universal Access Server documentation listed on Cisco.com at
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5800/index.htm.
DC voltages supplied
and maximum,
steady-state current
ratings
+5.2V @ 30A
+12.2V @ 9A
–12.0V @ 1.5A
+3.5V @ 13A
DC-input cable In accordance with local and national wiring regulations
Airflow ~80 cfm
8
Temperature 32 to 104°F (0 to 40°C) operating; –4 to 149°F (–20 to 65°C) nonoperating
Humidity 10 to 90% noncondensing
1. Mbps = megabits per second.
2. Btu = British thermal units.
3. VAC = volts alternating current.
4. A = amperes.
5. Hz = hertz.
6. AWG = American Wire Gauge.
7. VDC = volts direct current.
8. cfm = cubic feet per minute.
Table 1-1 Cisco 7206 Physical Specifications (continued)
Description Specification
To Next Page
Loading...
