1-33
Cisco 7200 VXR Installation and Configuration Guide
OL-5013-09
Chapter 1 Cisco 7200 VXR Product Overview
Field-Replaceable Units
• Flash memory for storing the boot helper image
• Boot ROM for storing sufficient code for booting the Cisco IOS software
• Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis
Figure 1-15 C7200-I/O-GE+E—With GBIC Gigabit Ethernet and RJ-45 Ethernet Receptacles
1 Temperature sensor 8 Captive installation screw
2 Midplane connectors 9 PC Card slots
3 Battery for SRAM 10 Gigabit Ethernet GBIC port
4 8-MB Flash memory (soldered) (U13) 11 Ethernet RJ-45 port
5 8-MB Flash memory (soldered), (U25) 12 Auxiliary port
6 Temperature sensor 13 Console port
7 SRAM (U19)