Cisco 7600 Series - Page 111

111
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
Application Control Engine (ACE) Module
With RSP720-10GE 12.2(33)SRD
WS-SVC-NAM-1
2.89 A@42 V Network Analysis Module 1; CEF256
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
With Route Switch Processor 720-1GE 12.2(33)SRC
With RSP720-10GE 12.2(33)SRD
Note
• WS-SVC-NAM-2 and WS-SVC-NAM-1 run their own software.
• WS-SVC-NAM-2 and WS-SVC-NAM-1 have been tested with OSM-2+4GE-WAN+ and the OC-12 Packet-over-SONET
OSMs.
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
ACE10-6500-K9
5.23 A@42 V Application Control Engine (ACE) module
With Supervisor Engine 720 12.2(33)SRB
With Route Switch Processor 720-1GE 12.2(33)SRC
ACE20-SBC-K9
5.23 A@42 V Cisco 7600 Series ACE 20 HW for Session Border Controller
With Supervisor Engine 720 12.2(33)SRB1
With Route Switch Processor 720-1GE 12.2(33)SRC
ACE20-MOD-K9
5.23 A@42 V Application Control Engine (ACE) module
ACE20 is the server load balancing service module for
Catalyst 6000 Series Switches and Cisco 7600 Series
Routers.
12.2(33)SRB
ACE30-MOD-K9
ACEMOD-EXPN-DC
7.85A @42 V
(5.23A +
2.62A)
Application Control Engine (ACE) module
ACE30 is the next generation server load balancing service
module for Catalyst 6000 Series Switches and Cisco 7600
Series Routers.
A4(1.0)
With Supervisor Engine 720 15.0(1)S
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version