Cisco 7600 Series Hardware

13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
Note See this publication for Supervisor Engine 32 hardware information:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Module_Installation/Su
p_Eng_Guide/supe_gd.html
Route Switch Processor 720
RSP 720 Common Features
• Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps small form pluggable (SFP) module; port
2 is configurable with either a 1-Gbps SFP module or a 10/100/1000-Mbps RJ-45
• Integrated 720-Gbps switch fabric
• Two CompactFlash Type II slots (on front panel) and 2-GB internal CompactFlash (1 GB each for
RP and SP)
• Requires larger power supplies and a high-speed fan tray
• QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t
DWDM-SFP-3739=
DWDM-SFP-4134=
DWDM-SFP-4532=
DWDM-SFP-4931=
DWDM-SFP-5332=
DWDM-SFP-5736=
DWDM-SFP-6141=

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13