Cisco 7600 Series Hardware

8
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
• Services SPAs, page 69
• Enhanced FlexWAN Module, page 69
• Enhanced FlexWAN Module Port Adapters, page 69
• Ethernet Services 20G Line Cards, page 70
• Ethernet Services 40G Line Cards, page 76
• ES+ Transport line cards start here, page 91
• Fan Trays, page 113
• Power Supplies, page 114
• Chassis, page 115
Note • Use the values in the “Power Required” column to determine the exact power requirements for your
configuration to ensure that you are within the power budget.
• Daughtercard power is shown separately.
• Enter the show power command to display current system power usage.
Supervisor Engines
• Supervisor Engine 720, page 8
• Supervisor Engine 32, page 10
• Route Switch Processor 720, page 13
Supervisor Engine 720
• Supervisor Engine 720 Common Features, page 9
• Supervisor Engine 720 with PFC3BXL, page 9
• Supervisor Engine 720 with PFC3B, page 10

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13