Cisco 7600 Series Hardware

7
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
Supported Hardware
These sections describe the hardware supported in Cisco IOS Release 12.2SR:
• Supervisor Engines, page 8
• Policy Feature Cards, page 24
• Distributed and Centralized Forwarding Cards, page 26
• XENPAKs, page 32
• X2 Modules, page 33
• Small Form-Factor Pluggable Modules (SFPs), page 42
• 10-Gigabit Ethernet Transceiver Modules, page 43
• DWDM-XFP Modules, page 43
• Power over Ethernet Daughtercards, page 46
• 10/100/1000 Ethernet Switching Modules, page 47
• Fast Ethernet Switching Modules, page 50
• Ethernet/Fast Ethernet (10/100) Switching Modules, page 52
• Ethernet Switching Modules, page 56
• Optical Services Modules (OSMs), page 56
• SPA Interface Processors (SIPs), page 59
• SIP-400 Combinations, page 60
• Services SPA Carrier (SSC), page 68
OL-10362-2 February, 2007 Added the following for Cisco IOS release 12.2SRB:
• RSP 720
• Policy Feature Card 3C
• Policy Feature Card 3CXL
• Distributed Forwarding Card 3CXL
• SFP-GE-S, SFP-GE-L, SFP-GE-Z
• 1-Port and 24-Port Channelized CEoP SPAs
• Ethernet Services 20G line cards
• Application Control Engine (ACE) Module
• Service Application Module for IP
• 6000 W DC power supply
• Cisco 7609-S router chassis
OL-10362-1 May, 2006 Initial version
Revision Date Change Summary

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13