120
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Related Documentation
Unsupported Service Modules
• WS-X6624-FXS, WS-X6608-T1, and WS-X6608-E1 voice modules
• WS-X6101-OC12-MMF and WS-X6101-OC12-SMF ATM LANE modules
• WS-X6302-MSM—Multilayer Switch Module
Unsupported Chassis
• Catalyst 6000 series chassis
• WS-C6509-NEB—Catalyst 6509-NEB chassis
• OSR-7609—Cisco 7609 chassis (supported in SRA but not later releases)
• CISCO7603—Cisco 7603 chassis
• WS-C6503—Catalyst 6503 chassis
Unsupported Power Supplies
These power supplies cannot support high-capacity fan trays:
–
WS-CAC-1300W
–
WS-CDC-1300W
–
WS-CAC-1000W
Note Unsupported modules remain powered down if detected and do not affect system behavior.
Related Documentation
The following publications are available for the Cisco 7600 series routers:
• Cisco 7600 Series Router Installation Guide
• Cisco 7600 Series Router Module Installation Guide
• Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
• Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide
• Cisco 7600 Series Router Cisco IOS Command Reference
• Cisco 7600 Series Internet Router System Message Guide
• Release Notes for Cisco IOS Release 12.2SRA on the Cisco 7600 Series Routers
• Cisco IOS Configuration Guides and Command References—Use these publications to help you
configure Cisco IOS software features not described in the Cisco 7600 series router publications:
–
Configuration Fundamentals Configuration Guide
–
Configuration Fundamentals Command Reference
–
Bridging and IBM Networking Configuration Guide
To Next Page
Loading...
Need help?
General
