110
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
Firewall Services Module
Intrusion Detection System Modules (IDSMs)
Network Analysis Modules (NAMs)
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
WS-SVC-FWM-1-K9
4.09 A@42 V Firewall Services Module; CEF256
With Route Switch Processor 720-1GE 12.2(33)SRC
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
Note
• Supervisor Engine 32 requires Firewall Services Module Software Release 2.3(3) or a later rebuild.
• WS-SVC-FWM-1-K9 runs its own software—See this publication for more information:
http://www.cisco.com/en/US/products/hw/modules/ps2706/ps4452/tsd_products_support_model_home.html
• With Firewall Services Module Software Release 2.3(1), WS-SVC-FWM-1-K9 maintains state when an NSF with SSO
redundancy mode switchover occurs.
• WS-SVC-FWM-1-K9 does not maintain state when a single router mode with stateful switchover (SRM with SSO)
redundancy mode switchover occurs.
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
WS-SVC-IDSM2-K9
2.50 A@42 V Intrusion Detection System Module 2; CEF256
With Supervisor Engine 720 12.2(33)SRA
With Route Switch Processor 720-1GE 12.2(33)SRC
With Supervisor Engine 32 12.2(33)SRC
Note
•
WS-SVC-IDSM2-K9 runs its own software—See this publication for more information:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids10/4029_02.htm
• WS-SVC-IDSM2-K9 has been tested with OSM-2+4GE-WAN+ and the OC-12 Packet-over-SONET OSMs.
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
WS-SVC-NAM-2
3.47 A@42 V Network Analysis Module 2; CEF256
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
With Route Switch Processor 720-1GE 12.2(33)SRC
To Next Page
Loading...
