Cisco 7600 Series Hardware

115
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
CISCO7603-S Power Supplies
All Other Power Supplies
Chassis
• 13-Slot Chassis, page 116
• 9-Slot Chassis, page 116
• 6-Slot Chassis, page 117
• 4-Slot Chassis, page 117
• 3-Slot Chassis, page 118
Note Cisco IOS Release 12.2SR is developed for and intended to run on Cisco 7600 series routers. If you are
interrested in running this release on Cisco Catalyst 6500 series switches, contact your account team.
Product ID
(append “=” for spares) Product Description
Minimum
Software Version
PWR-1500-DC
1500 W DC input (PWR-1500-DC) 12.2(33)SRB1
Product ID
(append “=” for spares) Product Description
Minimum
Software Version
WS-CAC-6000W
6000 W AC power supply
Note Limited to 4,000 W in WS-C6509 and WS-C6506.
12.2(18)SXD
PWR-4000-DC
4000 W DC power supply 12.2(33)SRA
WS-CAC-4000W
4000 W AC power supply 12.2(33)SRA
+WS-CAC-3000W
3000 W AC power supply
Note
•
Required with Supervisor Engine 720 in WS-C6509-NEB or OSR7609.
• Included in the WS-6509-NEB-UPGRD= upgrade kit.
12.2(33)SRA
WS-CAC-3000W
3000 W AC power supply 12.2(33)SRA
WS-CAC-2500W
2500 W AC power supply 12.2(33)SRA
WS-CDC-2500W
2500 W DC power supply 12.2(33)SRA
PWR-6000-DC
6000 W DC power supply 12.2(33)SRB

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13