EasyManua.ls Logo

Cisco 7600 Series - Page 41

Cisco 7600 Series
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
With RSP 720-10GE 12.2(33)SRC
Note
Supervisor Engine 720 supports a DFC3 on these WS-X6516-GBIC hardware revisions:
Lower than 5.0
5.5 and higher
Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBIC hardware revisions 5.0 through 5.4. With a
Supervisor Engine 720 and with a DFC3 installed, WS-X6516-GBIC hardware revisions 5.0 through 5.4 do not power up.
With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBIC hardware revisions 5.0 through 5.4 operate in bus
mode.
Refer to external field notice 24494 for more information:
http://www.cisco.com/warp/public/770/fn24494.shtml
WS-X6416-GBIC
2.81 A@42 V 16-port Gigabit Ethernet GBIC
QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1–8, 9–16
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
WS-X6416-GE-MT
2.50 A@42 V 16-Port Gigabit Ethernet MT-RJ
QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1–8, 9–16
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
WS-X6316-GE-TX
5.15 A@42 V 16-port Gigabit Ethernet RJ-45
QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1–8, 9–16
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
Note Supervisor Engine 32 does not support WS-X6316-GE-TX.
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version

Other manuals for Cisco 7600 Series

Related product manuals