Cisco 7600 Series - Page 54

54
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
WS-X6248A-TEL
2.69 A@42 V 48-port 10/100TX RJ-21
• 128-KB per-port packet buffers
• QoS port architecture (Rx/Tx): 1q4t/2q2t
• Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
With RSP 720-1GE 12.2(33)SRB
With RSP 720-10GE 12.2(33)SRC
WS-X6248-TEL
2.69 A@42 V 48-port 10/100TX RJ-21
• QoS port architecture (Rx/Tx): 1q4t/2q2t
• Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
With RSP 720-1GE 12.2(33)SRB
With RSP 720-10GE 12.2(33)SRC
WS-X6148A-RJ-45
WS-X6148A-45AF
2.39 A@42 V
2.57 A@42 V
48-port 10/100TX RJ-45
• 128-KB per-port packet buffers
• QoS port architecture (Rx/Tx): 1q4t/2q2t
• WS-X6148A-RJ-45 supports WS-F6K-GE48-AF
• WS-X6148A-45AF has WS-F6K-GE48-AF
• Number of ports: 48
Number of port groups: 4
Port ranges per port group: 1–12, 13–24, 25–36, 37–48
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
With RSP 720-1GE 12.2(33)SRB
With RSP 720-10GE 12.2(33)SRC
WS-X6148-RJ-45
2.39 A@42 V 48-port 10/100TX RJ-45
WS-X6148-RJ-45V
2.39 A@42 V 128-KB per-port packet buffers
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version