Cisco 7600 Series Hardware

57
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
• On OSMs with Gigabit Ethernet GBIC Layer 2 LAN ports:
– OSM LAN port numbering starts with 1.
– The LAN ports are in a single port group.
• The OSM-2+4GE-WAN+ and the OC-12 Packet-over-SONET OSMs have been tested with the
service modules and WS-SUP720.
• OSMs are not supported in the Cisco 7604 or in any S-series chassis.
Gigabit Ethernet WAN
OC-48 Packet over SONET
Note Also has four Layer 2 LAN ports.
OC-48 DPT/Packet over SONET
Note Also has four Layer 2 LAN ports.
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
OSM-2+4GE-WAN+
5.08 A@42 V 4-port Gigabit Ethernet WAN (GBIC) with two Layer 2 LAN ports; CEF256
With Supervisor Engine 720 12.2(33)SRA
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
OSM-1OC48-POS-SI+
OSM-1OC48-POS-SL+
OSM-1OC48-POS-SS+
3.90 A@42 V Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-IR; CEF256
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-LR; CEF256
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-SR; CEF256
With Supervisor Engine 720 12.2(33)SRA
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
OSM-2OC48/1DPT-SS
OSM-2OC48/1DPT-SI
OSM-2OC48/1DPT-SL
5.75 A@42 V 2-port OC-48 DPT/POS, SM-SR; CEF256
2-port OC-48 DPT/POS, SM-IR; CEF256
2-port OC-48 DPT/POS, SM-LR; CEF256
With Supervisor Engine 720 12.2(33)SRA

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13