Cisco 7600 Series Hardware

64
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
Note GLC-GE-100FX SFP is not supported on SPA-2X1GE-V2 SPA.
Fast Ethernet SPAs
POS SPAs
DWDM-SFP-6061= 12.2(33)SRD
DWDM-SFP-3346= 12.2(33)SRE
DWDM-SFP-3739= 12.2(33)SRE
DWDM-SFP-4134= 12.2(33)SRE
DWDM-SFP-4532= 12.2(33)SRE
DWDM-SFP-4931= 12.2(33)SRE
DWDM-SFP-5332= 12.2(33)SRE
DWDM-SFP-5736= 12.2(33)SRE
DWDM-SFP-6141= 12.2(33)SRE
SFPs Supported in
Gigabit Ethernet SPAs
GLC-GE-100FX 15.0(1)S
Product ID
(append “=” for spares) SIP Support Product Description
Minimum
Software Version
SPA-4X1FE-TX-V2
7600-SIP-400 4-port 10/100 Ethernet SPA TX 12.2(33)SRD
SPA-8X1FE-TX-V2
7600-SIP-400 8-port 10/100 Ethernet SPA TX 12.2(33)SRD
SPA-4X1FE-TX-V2
7600-SIP-200 4-port 10/100 Ethernet SPA TX 12.2(33)SRA
SPA-8X1FE-TX-V2
7600-SIP-200 8-port 10/100 Ethernet SPA TX 12.2(33)SRA
Product ID
(append “=” for spares) SIP Support Product Description
Minimum
Software Version
SPA-2XOC3-POS
7600-SIP-200
7600-SIP-400
2-port OC-3c/STM-1c POS SPA 12.2(33)SRA
SFP Modules Supported in
SPA-2XOC3-POS
SFP-OC3-MM
12.2(33)SRA
SFP-OC3-SR
12.2(33)SRA
SFP-OC3-IR1
12.2(33)SRA
SFP-OC3-LR1
12.2(33)SRA
Product ID
(append “=” for spares) SIP Support Product Description
Minimum
Software Version

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13