68
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
Circuit Emulation over Packet (CEoP) SPAs
Services SPA Carrier (SSC)
ONS-SC-155-EL
12.2(33)SRD2
SFP-OC3-LR1
12.2(33)SRD2
SPA-4XT-Serial SPA
7600-SIP-200 4-Port Serial Interface SPA 12.2(33)SRC1
Product ID
(append “=” for spares) SIP Support Product Description
Minimum
Software Version
SPA-2CHT3-CE-ATM
7600-SIP-400 2-Port Channelized T3/E3 ATM CEoP SPA 12.2(33)SRC
Note The SPA-2CHT3-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel.
SPA-1CHOC3-CE-ATM
7600-SIP-400 1-Port Channelized OC-3 STM1 ATM CEoP SPA 12.2(33)SRB
SFP Modules Supported in SPA-1XCHOC3-CE
SFP-OC3-MM
12.2(33)SRB
SFP-OC3-IR1
12.2(33)SRB
SFP-OC3-LR1
12.2(33)SRB
SFP-OC3-LR2
12.2(33)SRB
SFP-OC3-SR
12.2(33)SRB
ONS-SC-155-EL
12.2(33)SRD2
SPA-24CHT1-CE-ATM
7600-SIP-400 24-Port Channelized T1/E1/J1 ATM CEoP SPA 12.2(33)SRB
Note The SPA-24CHT1-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel.
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
7600-SSC-400
5.43 A@42 V Services SPA Carrier (SSC) 12.2(33)SRA
Note
•
7600-SSC-400 does not maintain state when an NSF with SSO redundancy mode switchover occurs.
• ES20 and ES+ cards are compatible with 7600-SSC-400 and SPA-IPSEC-2G and it's supported only from Cisco IOS
Release 12.2(33)SRE release onwards.
• RSP720-3C-10GE/RSP720-3CXL-10GE supports the 7600-SSC-400 from Cisco IOS Release 12.2(33)SRE onwards.
• Supervisor Engine 720 and Supervisor Engine 32 support the 7600-SSC-400 beginning with Cisco IOS Release
12.2(33)SRA .
• Route Switch Processor 720-1GE supports the 7600-SSC-400 beginning with Cisco IOS Release 12.2(33)SRC .
Product ID
(append “=” for spares) SIP Support Product Description
Minimum
Software Version
To Next Page
Loading...
Need help?
General
