Cisco 7841 Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 12 of 30
15. If successful, you should see the following message on your phone screen.
16. The phone will reboot and the screen will be blank.
MPP conversion is now complete! You can validate the success on the phone by navigating in your web browser to Info -> Status. Under
Product Information, the “Software Version” will indicate the phone load and this should NOT be the transitional load.

Cisco 7841 Specifications

General

Ethernet Switch	Yes
Lines	4
Headset Port	Yes
Wall Mountable	Yes
Display	3.5-inch grayscale display
Audio	Wideband audio
PoE	IEEE 802.3af
Speakerphone	Full-duplex
Ethernet Ports	2 x 10/100/1000
Headset Jack	RJ9
Protocols	SIP
Codec Support	G.711, G.722, G.729, iLBC
Mounting	Desk or wall
Weight	1 kg