Cisco 7911 User Guide

To cancel Call Forward (Busy)
 Lift the handset and dial 77*
 Hang up
Call Forward (No Answer)
Call Forward (No Answer) lets you forward calls to another number when you don’t answer.
 To enable/modify Call Forward (No Answer)
 Lift the handset and dial 78*
 Enter the extension or number for the forwarding destination followed by #. For external numbers,
use the Outside Access Digit.
 Press # to confirm followed by 2 to exit
 Hang up
To cancel Call Forward (No Answer)
 Lift the handset and dial 79*
 Hang up
Call Forward (Out of Service)
Call Forward (Out of Service) automatically forwards calls to another location when your business phone goes out of service.
The forwarding destination for Call Forward (Out of Service) is configured through the web portal or by your service provider.
 To enable Call Forward (Out of Service)
 Lift the handset and dial 70*
 Press # to confirm followed by 2 to exit
 Hang up
To disable Call Forward (Out of Service)
 Lift the handset and dial 71*
 Hang up

Cisco 7911 Specifications

General

Audio Codec Support	G.711, G.729a
Display	Monochrome
Ethernet	10/100Base-T Ethernet connection
Lines	1
Power	IEEE 802.3af Power over Ethernet (PoE)
Protocol Support	SIP