EasyManuals Logo

Cisco 7925G Installing Guide

Cisco 7925G
20 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
5
Downloading Load ID. The wireless IP phone checks to verify that the proper firmware is installed or if
new firmware is available to download.
Cisco Unified Communications Manager informs devices using .cnf or .cnf.xml format configuration files
of their load ID. Devices using .xml format configuration files receive the load ID in the configuration
file.
For more information, see Phone Configuration Files and Profile Files.
6
Downloading configuration file. The TFTP server has configuration files and profile files. A configuration
file includes parameters for connecting to Cisco Unified Communications Manager and information about
which image load a phone should be running. A profile file contains various parameters and values for
phone and network settings.
For more information, see:
Set Alternate TFTP Server
Phone Configuration Files and Profile Files
Startup and Connectivity Problems
7
Connecting to Cisco Unified Communications Manager.
The configuration file defines how the Cisco Unified IP Phone communicates with Cisco
Unified Communications Manager. After obtaining the file from the TFTP server, the phone attempts to
make a TCP connection to the highest priority Cisco Unified Communications Manager on the list.
For more information, see:
Cisco Unified Communications Manager Interactions
Startup and Connectivity Problems
8
Registering to Cisco Unified Communications Manager.
If the phone was manually added to the database, Cisco Unified Communications Manager identifies and
registers the phone. If the phone was not manually added to the database and autoregistration is enabled
in Cisco Unified Communications Manager, the phone attempts to autoregister itself in the Cisco
Unified Communications Manager database.
For more information, see:
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment
Add Users to Cisco Unified Communications Manager
Related Topics
Cisco Unified Wireless IP Phones Setup in Cisco Unified Communications Manager
Phone Configuration Files and Profile Files
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
20
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Setup
Phone Startup Process

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals