Cisco 7940G User Manual

13
Activate Do Not Disturb
For visual call alerting and information without audible ringing, use Do Not Disturb (DnD). Calls receive normal
call-forward-busy and no-answer treatment.
To activate the Do-Not-Disturb feature:
1. Press th
e more soft key to locate the DnD soft key.
2. Press th
e DnD soft key. A text message displays to indicate that the phone is in Do-Not-Disturb mode.
To deactivate the Do-Not-Disturb feature, repeat S
teps 1 and 2 in the idle state.
Park a Call (SCCP)
Call park allows a user to place a call on hold at a designated parking slot from which the call can be retrieved by anyone on
the system.
Note Contact your system administrator for your call park slot number.
To park a call:
• Press th
e Park soft key.
The Cisco Unified Communications Manager Express system automatically
selects an available call park slot and displays
the number on the Cisco Unified IP phone screen.
To park a call to a specific call park slot:
• Press th
e Transfer softkey followed by the call park slot number provided by your system administrator.
To retrieve a parked call:
• If y
our phone receives a call park notification, press the PickUp soft key followed by the asterisk (*).
• Press th
e PickUp soft key followed by the call park slot number.
Park a Call (SIP)
Call park allows a user to place a call on hold at a designated parking slot from which the call can be retrieved by anyone on
the system.
Note Contact your system administrator for your call park slot number.
To park a call:
• Press th
e Park soft key.
The Cisco Unified Communications Manager Express system automatically
selects an available call park slot and displays
the number on the Cisco Unified IP phone screen.
To retrieve a parked call:
• Dial
the park slot extension.
To park a call to a directed call park slot:
• Press th
e Transfer softkey followed by the call park slot number provided by your system administrator.
To retrieve a call parked at a directed call park slot:
• Dial
the retrieval park-slot extension.
Pick Up Calls
To pick up a call that is on hold or a call that is ringing at another extension:
1. Press th
e PickUp soft key.

Cisco 7940G Specifications

General

Keypad number of keys	12
Touchscreen	-
Speakerphone	Yes
Voice codecs	G.711, G.729a
Bluetooth	No
Supported network protocols	DHCP, SCCP, SIP, MGCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3 FCC 68 (CFR47) HAC IC CS-03
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g