Cisco 7941G - Unified IP Phone VoIP User Manual

4-11
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
DNS Server 1
DNS Server 2
DNS Server 3
DNS Server 4
DNS Server 5
Primary Domain Name System (DNS) server
(DNS Server 1) and optional backup DNS
servers (DNS Server 2–5) used by the phone.
1. Unlock network
configuration options.
2. Set the DHCP Enabled
option to No.
3. Scroll to the appropriate
DNS Server option, press
the Edit softkey, and then
enter a new DNS server IP
address.
4. Press the Validate softkey.
5. Repeat Steps 3 and 4 as
needed to assign backup
DNS servers.
6. Press the Save softkey.
Operational
VLAN ID
Auxiliary Virtual Local Area Network (VLAN)
configured on a Cisco Catalyst switch in which
the phone is a member.
If the phone has not received an auxiliary
VLAN, this option indicates the Administrative
VLAN.
If neither the auxiliary VLAN nor the
Administrative VLAN are configured, this
option is blank.
The phone obtains its
Operational VLAN ID via Cisco
Discovery Protocol (CDP) from
the switch to which the phone is
attached. To assign a VLAN ID
manually, use the Admin VLAN
ID option.
Admin. VLAN
ID
Auxiliary VLAN in which the phone is a
member.
Used only if the phone does not receive an
auxiliary VLAN from the switch; otherwise it is
ignored.
1. Unlock network
configuration options.
2. Scroll to the Admin. VLAN
ID option, press the Edit
softkey, and then enter a new
Admin VLAN setting.
3. Press the Validate softkey
and then press the Save
softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English