Cisco 7941G - Unified IP Phone VoIP User Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
4-12
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
DHCP Enabled Indicates whether DHCP is being used by the
phone.
1. Unlock network
configuration options.
2. Scroll to the DHCP Enabled
option and press the No
softkey to disable DHCP, or
press the Yes softkey to
enable DHCP.
3. Press the Save softkey.
DHCP Address
Released
Releases the IP address assigned by DHCP. 1. Unlock network
configuration options.
2. Scroll to the DHCP Address
Released option and press
the Yes softkey to release the
IP address assigned by
DHCP, or press the No
softkey if you do not want to
release this IP address.
3. Press the Save softkey.
Alternate TFTP Indicates whether the phone is using an
alternative TFTP server.
1. Unlock network
configuration options.
2. Scroll to the Alternate TFTP
option and press the Yes
softkey if the phone should
use an alternative TFTP
server; otherwise press the
No softkey.
3. Press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English