Cisco 7941G - Unified IP Phone VoIP User Manual

8-9
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
PC Port Configuration Speed and duplex of the switch port, where:
• A—Auto Negotiate
• 10H—10-BaseT/half duplex
• 10F—10-BaseT/full duplex
• 100H—100-BaseT/half duplex
• 100F—100-BaseT/full duplex
• 1000H—1000-BaseT/half duplex
• 1000F—1000-BaseT/full duplex
• No Link—No connection to the PC port
TFTP Server 2 Backup TFTP server that the phone uses if the primary TFTP server is
unavailable.
User Locale User locale associated with the phone user. Identifies a set of detailed
information to support users, including language, font, date and time
formatting, and alphanumeric keyboard text information.
Network Locale Network locale associated with the phone user. Identifies a set of
detailed information to support the phone in a specific location,
including definitions of the tones and cadences used by the phone.
Headset Enabled Indicates whether the Headset button is enabled on the phone.
User Locale Version Version of the user locale loaded on the phone.
Network Locale Version Version of the network locale loaded on the phone.
PC Port Disabled Indicates whether the PC port on the phone is enabled or disabled.
Speaker Enabled Indicates whether the speakerphone is enabled on the phone.
GARP Enabled Indicates whether the phone learns MAC addresses from Gratuitous
ARP responses.
Video Capability Enabled Indicates whether the phone can participate in video calls when
connected to an appropriately equipped PC.
Voice VLAN Enabled Indicates whether the phone allows a device attached to the PC port to
access the Voice VLAN.
Table 8-2 Network Configuration Area Items (continued)
Item Description

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English