Cisco 7941G - Unified IP Phone VoIP User Manual

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
8-10
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Auto Line Select Indicates whether the phone shifts the call focus to incoming calls on
all lines.
DSCP for Call Control DSCP IP classification for call control signaling.
DSCP for Configuration DSCP IP classification for any phone configuration transfer.
DSCP for Services DSCP IP classification for phone-based services.
Security Mode Displays the security mode that is set for the phone.
Web Access Enabled Indicates whether web access is enabled (Yes) or disabled (No) for the
phone.
Span to PC Port Indicates whether the phone will forward packets transmitted and
received on the network port to the access port.
PC VLAN VLAN used to identify and remove 802.1P/Q tags from packets sent
to the PC.
CDP: PC Port Indicates whether CDP is supported on the PC port.
CDP: SW Port Indicates whether CDP is supported on the switch port.
LLDP-MED: SW Port Indicates whether Link Layer Discovery Protocol Media Endpoint
Discovery (LLDP-MED) is enabled on the switch port.
LLDP: PC Port Indicates whether Link Layer Discovery Protocol (LLDP) is enabled
on the PC port.
LLDP Power Priority Advertises the phone’s power priority to the switch, enabling the
switch to appropriately provide power to the phones. Settings include:
• Unknown—default
• Low
• High
• Critical
LLDP Asset ID Identifies the asset ID assigned to the phone for inventory
management.
Table 8-2 Network Configuration Area Items (continued)
Item Description

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English