Cisco 7941G - Unified IP Phone VoIP - Page 49

1-31
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
Step 8
Assign services to phone buttons
(optional).
Provides single button access
to an IP phone service or
URL.
Refer to
Cisco
Communications
Manager Administration
Guide, “Cisco
Unified
IP Phone
Configuration” chapter,
“Adding a Cisco
Unified
IP Phone Service
to a Phone Button”
section.
Step 9
Add user information by
configuring required fields.
Required fields have an
associated asterisk (*).
Adds user information to the
global directory for Cisco
Unified
Communications
Manager.
Refer to
Cisco
Communications
Manager Administration
Guide,
“End User Configuration”
chapter.
See the “Adding Users to
Cisco
Unified Communications
Manager” section on
page 5-30.
Step 10
Add a user to a Cisco Unified
Communications Manager end
user group.
Associates users with group
attributes and privileges.
Refer to
Cisco
Communications
Manager Administration
Guide,
“End User Configuration”
chapter, “End User
Configuration Settings”
section and “User Group
Configuration” chapter,
“Adding Users to a User
Group” section.
Table 1-6 Checklist for Configuring the Cisco Unified IP Phone 7961G/7961G-GE
7941G/7941G-GE in Cisco Unified Communications Manager (continued)
Task Purpose For More Information