Cisco 7941G - Unified IP Phone VoIP User Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
1-30
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Step 5
Customize softkey templates. Adds, deletes, or changes
order of softkey features that
display on the user’s phone to
meet feature usage needs.
Refer to
Cisco
Communications
Manager Administration
Guide,
“Softkey Template
Configuration” chapter.
See the “Configuring
Softkey Templates”
section on page 5-28.
Step 6
Configure speed-dial buttons
and assign speed-dial numbers
(optional).
Adds speed-dial buttons and
numbers.
Note Users can change
speed-dial settings
on their phones by
using Cisco Unified
Communications
Manager User
Options.
Refer to
Cisco
Communications
Manager Administration
Guide, “Cisco
Unified
IP Phone
Configuration” chapter,
“Configuring Speed-Dial
Buttons” section.
Step 7
Configure Cisco
Unified
IP Phone services and
assign services (optional).
Provides IP Phone services.
Note Users can add or
change services on
their phones by using
the Cisco
Unified
IP Phone
User Options.
Refer to
Cisco
Communications
Manager Administration
Guide, “Cisco
Unified
IP Phone Services
Configuration” chapter.
See the “Setting Up
Services” section on
page 5-29.
Table 1-6 Checklist for Configuring the Cisco Unified IP Phone 7961G/7961G-GE
7941G/7941G-GE in Cisco Unified Communications Manager (continued)
Task Purpose For More Information

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English