Cisco 7941G - Unified IP Phone VoIP User Manual

1-33
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
Checklist for Installing the Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE
Table 1-7 provides an overview and checklist of installation tasks for the
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE. The list
presents a suggested order to guide you through the phone installation. Some tasks
are optional, depending on your system and user needs. For detailed procedures
and information, refer to the sources in the list.
Ta b l e 1-7 Checklist for Installing the Cisco
Unified IP Phone 7961G/7961G-GE/7941G/7941G-GE
Task Purpose For More Information
Step 1
Choose the power source for
the phone:
• Power over Ethernet
(PoE)
• External power supply
Determines how the phone
receives power.
See the “Providing Power
to the Cisco Unified IP
Phone” section on
page 2-4.
Step 2
Assemble the phone, adjust
phone placement, and connect
the network cable.
Locates and installs the phone
in the network.
See the “Installing the
Cisco Unified IP Phone”
section on page 3-7.
See the “Adjusting the
Placement of the Cisco
Unified IP Phone” section
on page 3-13.
Step 3
Add a Cisco Unified IP Phone
Expansion Module 7914 to the
Cisco Unified
IP Phone
7961G/7961G-GE (optional).
Extends functionality of a
Cisco Unified
IP Phone
7961G/7961G-GE by adding
14 line appearances or speed
dial numbers.
See the “Attaching the
Cisco Unified IP Phone
Expansion Module 7914
(SCCP Phones Only)”
section on page 3-11.
Step 4
Monitor the phone startup
process.
Verifies that phone is
configured properly.
See the “Verifying the
Phone Startup Process”
section on page 3-16.

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English