Cisco 7961 User Guide

11
MartinezUnifiedSchoolDistrict
PhoneandVoicemailUsersGuideforCisco7961Phones

Changing the LCD Contrast
The color contrast can be adjusted on the LCD screen to improve the readability
of the display.
1. Press the Settings mode button located on the lower right side of the phone base.
2. Press the number 1 on the number pad to select the Contrast option. If the phone
does not have an expansion mode, continue to step 4.
3. If the phone has an Expansion Mode, the contrast can also be changed on it. Press
1 on the number pad to change the contrast on the Base Phone or press 2 on the
number pad and select Expansion Module option.
4. Press the Softkey located directly below the words Down or Up on the LCD screen
to change the contrast. (NOTE: the volume up or down buttons may also be used to
5. change the contrast in this step)
6. Once the desired level of contrast is achieved, press the Softkey located directly
below the word OK on the LCD screen.
7. Press the Softkey located directly below the word Save on the LCD screen, to save
the changes.

Cisco 7961 Specifications

General

Line Buttons	6
Speakerphone	Yes
Network Protocol	SIP, SCCP
Display	320 x 222 pixels
Ethernet Switch	10/100BASE-T
Power Options	Power over Ethernet (PoE)
Audio Codec Support	G.711, G.729a, G.729ab, iLBC
Weight	3.5 lb (1.6 kg)
Dimensions	8.0 x 10.5 x 6.0 in. (203 x 267 x 152 mm)