Cisco 7965 Quick Reference Guide

4
How Do I:
How Do I? Solution Tip
Place a Call? Lift the handset and dial the number
OR Press the NewCall softkey and dial the
number
OR Press the Redial softkey
Put a Call on
Hold?
Press the Hold softkey button.
The call will display a paused symbol
To return to the call, press the Resume
button
A call on hold remains
active even though you
and the other party
cannot hear each
other. You can answer
or place another call
while a call is on hold.
Note as there is no
hold music please keep
the caller informed
Adjust the
Handset
Volume?
Press the up or down Volume button when
the handset is in use.
Press the Save softkey to save your change.
Adjust the
Ringer
Volume?
Press the up or down Volume button when
the handset is not in use (in the handset
cradle).
Use the
Speaker?
To activate the speaker:
During a call, press the Loudspeaker button,
then hang up the handset.
To switch from the speaker to the
handset:
Just pick up the handset.
To turn off the speaker and hang up:
Press the Loudspeaker button.
To adjust the speaker volume:
Press the up or down Volume button when
the speaker is in use.
Press the Save softkey to save your change.

Cisco 7965 Specifications

General

Protocol	SIP, SCCP
Weight	3.5 lbs
Network	10/100/1000 Ethernet
Power	Power over Ethernet (PoE) or AC adapter
Lines	6
Ethernet Ports	2
Speakerphone	Full-duplex
Headset Port	Dedicated headset port
Codecs	G.711, G.729a, G.722, iLBC
Audio	Handset, speakerphone