Cisco 7965 Quick Start Guide

7
Whenyouhearthelongdistancetone,enteryoursix-digitlongdistancecalling 3.
 code.
Whenyouaredone,hangup.4.
Put a call on hold
Toplaceacallonhold,dothefollowing:
Whileyouareonacall,pressthe1. Holdbuon.
Totakeacallohold,pressthe2. Resumebuon.
Make a second call
Whileyouhaveacallonhold,youcanmakeasecondcallwithouthangingup.Tomakea
secondcall,dothefollowing:
Whileyouareonacall,pressthe1. Holdbuon.Thisplacestherstcallonhold.
Pressthe2. New Callbuon.
Enterthephonenumberforthesecondcall.3.
Toswitchbacktotherstcall,pressuponthearrowpadtoselecttherstcall.4.
Pressthe5. Resume buon.Thisplacesthesecondcallonhold.
Toendanacvecall,pressthe6. End Call buon.Ifacallisonhold,youmust 
 resumeitbeforeyoucanendit.
Accept a second call
Whileyouareonacall,youcananswerasecondcall.Ifyoudon’tanswerthesecond
call,itissenttoyourvoicemail.Toacceptasecondcall,dothefollowing:
Ifyouareonacallwhenreceiveasecondcall,youwillhearabeepandthe 1.
 secondcaller’sphonenumberwillappearonyourphonedisplay.
Toacceptthesecondcall,pressthe2. Answerbuon.Thisplacestherstcallon 
 hold.
Toswitchbacktotherstcall,pressuponthearrowpadtoselecttherstcall.3.
Pressthe4. Resume buon.Thisplacesthesecondcallonhold.
Toendanacvecall,pressthe5. End Call buon.Ifacallisonhold,youmust 

Cisco 7965 Specifications

General

Protocol	SIP, SCCP
Weight	3.5 lbs
Network	10/100/1000 Ethernet
Power	Power over Ethernet (PoE) or AC adapter
Lines	6
Ethernet Ports	2
Speakerphone	Full-duplex
Headset Port	Dedicated headset port
Codecs	G.711, G.729a, G.722, iLBC
Audio	Handset, speakerphone