Cisco 8845 Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 12 of 30
15. If successful, you should see the following message on your phone screen.
16. The phone will reboot and the screen will be blank.
MPP conversion is now complete! You can validate the success on the phone by navigating in your web browser to Info -> Status. Under
Product Information, the “Software Version” will indicate the phone load and this should NOT be the transitional load.

Cisco 8845 Specifications

General

Camera	No
Audio	Wideband audio
Speakerphone	Yes
Wi-Fi	No
Display	5-inch color display
Resolution	480 x 272 pixels
Ethernet	10/100/1000 Mbps
PoE	IEEE 802.3af/at
Protocols	SIP
Codecs	G.711, G.722, G.729a, iLBC
USB Ports	2 x USB 2.0