EasyManuals Logo

Cisco 8845 Firmware Migration Master Guide

Cisco 8845
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 4 of 30
Note: If you are a Flex plan subscriber, see Appendix A: Flex plan - How to order licenses via Product Upgrade Tool (PUT).
Gather all the device information listed below for all the phones to check the firmware migration eligibility and to generate the
migration licenses. See Appendix C: How to Generate a License File for Firmware Conversion.
Device Information
Importance
PID (Model)
MUST
VID (Version number)
MUST for 7800 series phones
MAC address
MUST
Serial Number
Recommended
In this guide, we will cover the Cisco Unified Communications Manager (Unified CM)-based approach. This method is intended to further your
understanding of how the entire process works from end-to-end. Following guides have detailed instructions if you wish to use your web /
TFTP server.
Enterprise to MPP conversion guide:
http://cs.co/E2M-guide
MPP to Enterprise conversion guide:
http://cs.co/M2E-guide

Other manuals for Cisco 8845

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 8845 and is the answer not in the manual?

Cisco 8845 Specifications

General IconGeneral
CameraNo
AudioWideband audio
SpeakerphoneYes
Wi-FiNo
Display5-inch color display
Resolution480 x 272 pixels
Ethernet10/100/1000 Mbps
PoEIEEE 802.3af/at
ProtocolsSIP
CodecsG.711, G.722, G.729a, iLBC
USB Ports2 x USB 2.0

Related product manuals