Cisco 8851 Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 21 of 30
Appendix B: How to generate licenses for firmware conversion
The following information covers how to generate the license files.
1. Go to LRP (License and Registration Portal) - https://slexui.cloudapps.cisco.com/SWIFT/LicensingUI/Quickstart#
2. Sign in using your email registered for cisco.com
3. Click on PAKs or Tokens. PAK that was delivered to your cisco.com registered email address will be showing here. Select the
checkbox next to it and click on Get License
4. Click Next on the Get New Licenses from a Single PAK/Token
5. Select the input method (Bulk or Manual).
• Bulk upload

Cisco 8851 Specifications

General

Resolution	800 x 480 pixels
Network Interfaces	Dual Gigabit Ethernet ports
Headset Port	Yes
Audio	Wideband audio
Ethernet	10/100/1000 Mbps
USB	Yes, USB 2.0
Power	IEEE 802.3af/at Power over Ethernet (PoE)
Protocols	SIP
PoE	Yes
Codec Support	G.711, G.722, G.729, iLBC
Headset Connector	RJ9
Lines	Up to 5 lines
Dimensions	229 x 256 x 41 mm (excluding foot stand)
Weight	1.2 kg