Cisco 8851 Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 27 of 30
Appendix D: Overview of the Cisco IP Phone MPP GUI
NOTE: The following steps are not possible on the 7800 or 8800 Series phone screen using Enterprise firmware.
1. On your phone, press the Applications button [ ], scroll to Speed dials
2. On the Speed dials screen, press Edit
3. Scroll to Name and enter “abc” on the keypad
4. Scroll to number and enter a phone number. Click Save. Your entry should resemble this.
5. Press Call.
6. On your phone, press the Applications button [ ], scroll to User Preferences -> Call preferences -> Call Forwarding.
7. Select Forward busy number and set to 3800.

Cisco 8851 Specifications

General

Resolution	800 x 480 pixels
Network Interfaces	Dual Gigabit Ethernet ports
Headset Port	Yes
Audio	Wideband audio
Ethernet	10/100/1000 Mbps
USB	Yes, USB 2.0
Power	IEEE 802.3af/at Power over Ethernet (PoE)
Protocols	SIP
PoE	Yes
Codec Support	G.711, G.722, G.729, iLBC
Headset Connector	RJ9
Lines	Up to 5 lines
Dimensions	229 x 256 x 41 mm (excluding foot stand)
Weight	1.2 kg