Cisco 8865NR

For configuration information, see the Cisco Visual Voicemail documentation at http://www.cisco.com/
c/en/us/support/unified-communications/visual-voicemail/model.html.
Note
The Visual Voicemail client is not supported as a midlet on any of the Cisco IP Phone 8800 phones.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Services.
Step 2
Select Add New to create a new service for Visual Voicemail.
Step 3
In the IP Phone Service Configuration window, enter the following information in their respective fields:
• Service Name—Enter VisualVoiceMail.
• ASCII Service Name—Enter VisualVoiceMail.
• Service URL—Enter as Application:Cisco/VisualVoiceMail.
• Service Category—Select XML Service from the pulldown menu.
• Service Type—Select Messages from the pulldown menu.
Step 4
Check Enable and click Save.
Ensure that you do not check Enterprise
Subscription.
Note
Step 5
In the Service Parameter Information window, click New Parameter and enter the following information in
their respective fields:
•
Parameter Name. Enter voicemail_server.
•
Parameter Display Name. Enter voicemail_server.
•
Default Value. Enter the hostname of the primary Unity Server.
•
Parameter Description
Step 6
Check Parameter is Required and click Save.
Ensure that you do not check Parameter is a Password (mask contents).Note
Step 7
Close the window and select Save again in the Phone Service Configuration window.
Set Up Visual Voicemail for a Specific User
Use the following procedure to configure Visual Voicemail for a specific user.
For configuration information, see the Cisco Visual Voice Mail documentation at http://www.cisco.com/
c/en/us/support/unified-communications/visual-voicemail/model.html.
Note
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
180
Phone Feature Configuration