Cisco 8945 - Set Ip Address Field; Set Subnet Mask Field

Set IP Address Field
Procedure
Step 1
Set the DHCP Enabled option to No.
Step 2
Scroll to the IP Address option, press Select, and enter a new IP Address.
Step 3
Press Apply.
Set Subnet Mask Field
Procedure
Step 1
Set the DHCP Enabled option to No.
Step 2
Scroll to the Subnet Mask option, press Select, and enter a new subnet mask.
Step 3
Press Apply.
Set Default Router Field
Procedure
Step 1
Set the DHCP Enabled option to Disable.
Step 2
Scroll to the appropriate Default Router option, press Select, and enter a new router IP address.
Step 3
Press Apply.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
12
Cisco Unified IP Phone Installation
Set IP Address Field