Cisco 8945 Administration Guide

Table 3: LED Diagnostic Status
SpeakerMuteHoldMWIHardware test
OnOnOnOnPower is Ready
OnOnOn
—
Flash is Accessible
OnOn
——
RAM Test Successful
On
———
Ethernet Test Successful
2
The screen displays the Cisco Systems, Inc., logo screen.
3
This message appears as the phone starts up: Phone not registered
4
The home screen displays:
•
Current date and time
•
Primary directory number
•
Additional directory numbers and speed dial numbers, if configured (only on Cisco Unified IP Phone
8941)
•
Softkeys
If the phone successfully passes through these stages, it has started up properly.
Related Topics
Startup Problems
Cisco IP Phone Does Not Go Through Normal Startup Process
Configure Phone Services for Users
You can give users access to Cisco IP Phone Services on the IP phone. You can also assign a button to different
phone services. These services comprise XML applications and Cisco-signed Java midlets that enable the
display of interactive content with text and graphics on the phone. The IP phone manages each service as a
separate application. Examples of services include local movie times, stock quotes, and weather reports.
Before a user can access any service:
•
You must use Cisco Unified Communications Manager Administration to configure services that are
not present by default.
•
The user must subscribe to services by using the Cisco Unified Communications Self Care Portal. This
web-based application provides a graphical user interface (GUI) for limited, end-user configuration of
IP phone applications. However, a user cannot subscribe to any service that you configure as an enterprise
subscription.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
and SIP)
15
Cisco Unified IP Phone Installation
Configure Phone Services for Users

Cisco 8945 Specifications

General

Brand	Cisco
Model	8945
Category	IP Phone
Language	English