Cisco 8961 IP Quick Reference
Make
C
alls
Do one of the following:
•
Lift the handset and enter the phone number.
•
Press an unlit Session Button on the right side of the phone.
•
Press the New Call
soft key
.
•
Press the (unlit) Headset or Speakerphone
Button.
Dial from the Call
H
istor
y
As you enter a phone number, matching phone numbers display from your call history.
To dial, do one of the following:
•
Scroll to a number and press Select in the Navigation
pad
.
•
Press the Call
soft key
.
•
Pick up the handset.
Redial Nu
m
b
ers
•
Press the Redial soft key. Your phone calls the last number you
dialed.
End
Ca
lls
There are several ways
to end a call on your
phone.
Note: You must resume
a call in order to end the
call.
•
Replace the handset in its cradle.
•
Press the Release Button .
•
Press the End Call soft key.
•
Press the lit Headset or Speakerphone
Button
.
Answer Calls
There are several different
ways of answering calls
on your phone.
If you want to silence the
ringer when an incoming
call arrives, press the
LEFT SIDE/VOLUME DOWN
on the Volume
Button.
To answer a ringing call , do one of the following:
• Lift the handset.
• Press the flashing amber Session Button on the right side of the phone.
• Press the unlit Headset or Speakerphone Button.
• Press Select in the Navigation pad .
Call Waiting
If a second call arrives while you are on another call, a second Session Button displays.
To answer the second call and put the first call on hold, press the flashing amber
Session Button on the right side of the phone.
Mute Calls
Mute applies to all modes:
handset, headset, and
hands- free
ou may mute your phone using the Mute Button. This allows you to listen to all parties on a
all but prevents them from hearing any noise coming from your line.
ress Mute
to toggle Mute on and off. When Mute is on, the Mute Button glows red.
1
To Next Page
Need help?
General
