Cisco 8961 Setup

Phone Setup
•
Connect Footstand, page 1
•
Adjust Phone Display Viewing Angle, page 2
•
Adjust the Handset Rest, page 3
•
Secure the Phone with a Cable Lock, page 4
Connect Footstand
If your phone is placed on a table or desk, connect the footstand to the back of the phone.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
1

Cisco 8961 Specifications

General

Resolution	640 x 480 pixels
Display	5-inch TFT color display
Ethernet	10/100/1000 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE) Class 3
Connectivity	Two-port Gigabit Ethernet switch
Buttons	4 softkeys
USB Port	Yes, supports USB 2.0
Headset Jack	Yes, dedicated headset port
Speakerphone	Full-duplex speakerphone
Codec Support	G.711, G.722, G.729, iLBC
Security	802.1X authentication, TLS, SRTP, HTTPS