Phone with Multiple Lines
If you have multiple lines, you can use All Calls to view all calls on all lines. Your system administrator can
also set up your primary line key to automatically display all calls on all lines.
If you handle many calls at one time, use Answer to answer the oldest incoming call without having to scroll
down the call list and select the call.
For more information, contact your system administrator.
Displays information about the primary phone line.
Look for the blue icon on the line label to see which line is selected. In this
case, the primary line is selected, and the information displayed is for the
primary line only.
Primary line label1
Displays the date and time, and information (such as phone number) about
the selected line.
Header2
Displays information (such as call status and duration) about a connected
call associated with the selected line.
The timer counts the call duration in minutes and seconds (MM:SS) until the
call exceeds 60 minutes. Then the timer counts hours and minutes (HH:MM).
Session label (with Connected Call icon)3
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
18
Features of Your Cisco Unified IP Phone
Phone Screen
To Next Page
Loading...
Need help?
General
