Cisco 9951 - Basic Features; Placing a Call; Answering a Call; Ending a Call

CLODU VOICE S Service Remote Extension S (Video) – Cisco 9951 IP Phone
Version 5.0
12
4 Basic Features
4.1 Placing a Call
There are 4 options for placing a new call:
1. When using the handset, lift the handset and dial the number.
2. To make a new call on the current line, press the NewCall soft key and
dial the number.
3. To dial with the phone on hook, from the main screen, perform either of
these actions:
 Dial the number and lift handset or press the Dial soft key. The phone
will not produce the dial tone until after you lift the handset or press the
Dial soft key.
 Press the NewCall soft key and dial the number.
4. To dial the last dialed number, press the Redial soft key.
4.2 Answering a Call
There are 3 options for answering a call:
1. Lift the handset.
2. Press the Answer soft key
3. Press the Speakerphone button
4.3 Ending a Call
There are 3 options for ending a call:
1. Hang up the handset.
2. Press the EndCall soft key
3. Press the Speakerphone button , when using hand-free
conversation mode